2021 Jeep Cherokee First Oil Change: Expert Tips, Cost, and Schedule
Picture yourself driving down the open road, wind in your hair, with the powerful 2021 Jeep Cherokee beneath you. It’s a beast of a machine, built to conquer any terrain and go the distance.
But even the mightiest of vehicles need a little bit of TLC every now and then. That’s why, today, we delve into the world of the 2021 Jeep Cherokee’s first oil change.
As the heartbeat of your vehicle, the 3.2L engine requires regular oil changes every 7500 miles. But fear not, for we have the guide you need – detailing the specific tools, parts, and steps to keep your Jeep running like a dream.
So buckle up and join us on this journey, as we navigate the intricate world of maintaining your trusty steed.
2021 jeep cherokee first oil change
The recommended oil change interval for the 2021 Jeep Cherokee with the 3.2L engine is every 7500 miles. To perform the first oil change, you will need several tools including a 13mm or 1/2″ socket or wrench, 10mm socket, 24mm 6 point socket with extension, ratchet, oil drain pan, shop towel or rags, and ramps or a jack with jack stands.
Additionally, you will need 5.9 quarts of 5W20 engine oil and a Wix WL10010 or equivalent oil filter. The procedure for the oil change involves parking the vehicle in a level spot, warming the engine to operating temperature, raising the front end using ramps or jack stands, and following a series of steps including removing and replacing the engine oil drain plug, the oil filter element, and filling the engine with new oil.
After completing the oil change, it is important to check the engine oil level on the dipstick. This oil change guide is specific to the 2013-2021 model year Jeep Cherokee with the 3.2L V6 engine.
Key Points:
- Recommended oil change interval for 2021 Jeep Cherokee is 7500 miles
- Tools needed for first oil change:
- 13mm or 1/2″ socket or wrench
- 10mm socket
- 24mm 6 point socket with extension
- ratchet
- oil drain pan
- shop towel or rags
- ramps or jack with jack stands
- 5.9 quarts of 5W20 engine oil and a Wix WL10010 or equivalent oil filter required
- Procedure involves:
- parking in level spot
- warming engine
- raising front end
- following steps to remove and replace oil drain plug and filter element
- Engine oil level should be checked on dipstick after oil change
- Guide specific to 2013-2021 Jeep Cherokee with 3.2L V6 engine
Sources
https://theweekendmechanic.com/jeep-cherokee-oil-change/
https://www.jeepgarage.org/threads/first-oil-change-when-do-you-do-it.60357/
https://vehicle.firestonecompleteautocare.com/jeep/cherokee/2021/maintenance/oil/
https://vehicle.firestonecompleteautocare.com/jeep/cherokee/2021/maintenance/
Check this out:
💡 Pro Tips:
1. Use a quality oil filter: While the summary mentions the Wix WL10010 or equivalent oil filter, it’s important to emphasize the importance of using a high-quality filter to ensure proper filtration and protect your engine.
2. Replace the drain plug washer: When performing the oil change, it’s a good idea to replace the drain plug washer as well. This helps ensure a tight seal and prevent any oil leaks.
3. Consider using synthetic oil: While the summary doesn’t mention the type of oil to use, considering synthetic oil for your 2021 Jeep Cherokee can provide enhanced engine protection and improved performance.
4. Dispose of used oil properly: After completing the oil change, make sure to dispose of the used oil responsibly. Many auto parts stores and service centers will accept used oil for recycling.
5. Keep a record of oil changes: It’s helpful to keep a record of your oil changes, noting the date and mileage. This can help you stay on top of maintenance and provide a valuable history if any issues arise in the future.
Oil Change Interval For 2021 Jeep Cherokee With 3.2L Engine
The oil change interval for the 2021 Jeep Cherokee with the 3.2L engine is every 7500 miles. This recommended interval ensures that the engine’s oil remains clean and provides optimal lubrication for the various moving parts.
Regular oil changes are crucial for maintaining the performance and longevity of your vehicle.
During these oil change intervals, it is also recommended to inspect the oil filter and replace it if necessary. The oil filter plays a vital role in capturing dirt, debris, and contaminants from the engine oil, preventing them from causing damage or decreasing the oil’s effectiveness.
Keeping the oil and filter fresh is essential for the overall health of the engine.
Tools Needed For Oil Change
Performing an oil change on your 2021 Jeep Cherokee requires a few tools and equipment. Here is a list of what you’ll need:
- 13mm or 1/2″ socket or wrench
- 10mm socket
- 24mm 6 point socket with extension
- Ratchet
- Oil drain pan
- Shop towel or rags
- Ramps or jack with jack stands
Having these tools readily available will ensure a smooth and efficient oil change process.
Parts Required For Oil Change
To complete the oil change on your 2021 Jeep Cherokee, you will need the following parts:
- 5.9 quarts of 5W20 engine oil
- Wix WL10010 or equivalent oil filter
Ensure you have the correct amount and type of engine oil, as using the wrong oil can negatively affect engine performance and cause damage. The Wix WL10010 filter is recommended due to its quality construction and compatibility with the Jeep Cherokee.
Procedure For Oil Change
Performing an oil change on your 2021 Jeep Cherokee involves several steps. Here is a detailed procedure to guide you through the process:
-
Park the vehicle in a level spot and engage the parking brake.
-
Warm the engine to operating temperature by allowing it to idle for a few minutes.
-
Safely raise the front end of the vehicle using ramps or jack stands.
-
Remove the engine oil fill cap and check the oil level on the dipstick.
If the oil level is low, add oil as needed. 5.
Access the oil filter by removing the engine oil filter access panel. 6.
Using a 24mm socket, loosen the oil filter housing. 7.
If the drain plug is covered by a skid plate, remove the skid plate to access the drain plug. 8.
Carefully remove and replace the engine oil drain plug, ensuring it is properly tightened. 9.
If the vehicle is equipped with a skid plate access panel, reinstall it. 10.
Replace the oil filter element with a new one, ensuring it is securely in place. 11.
Reinstall the engine oil filter access panel. 12.
Fill the engine with 5.9 quarts of new engine oil, following the manufacturer’s specifications. 13.
Reinstall the engine oil fill cap securely. 14.
Start the engine and allow it to run for a few minutes to build oil pressure. Inspect for any leaks.
-
Shut down the engine and wait for a few minutes.
-
Lower the vehicle from the ramps or jack stands to the ground.
-
Finally, check the engine oil level on the dipstick, ensuring it is within the recommended range.
Following these steps will allow you to perform an oil change on your 2021 Jeep Cherokee accurately and safely.
Specificity Of Oil Change Guide For 2013-2021 Jeep Cherokee
It is important to note that this oil change guide is specific to the 2013-2021 model year Jeep Cherokee with the 3.2L V6 engine. While the general principles of an oil change apply to other models and engines, there may be slight variations in the procedure or specific tools required.
Always refer to the manufacturer’s recommendations and consult the vehicle’s owner’s manual for the most accurate and up-to-date information for your specific vehicle.
Checking Engine Oil Level After Oil Change
After completing the oil change on your 2021 Jeep Cherokee, it is crucial to check the engine oil level to verify that it is within the recommended range. To do this, follow these steps:
-
Ensure the vehicle is on a level surface.
-
Remove the engine oil dipstick, wipe it clean with a shop towel or rag, and reinsert it fully.
-
Wait a few seconds and then remove the dipstick again.
-
Observe the oil level on the dipstick.
It should fall within the recommended range between the low and high marks. 5.
If the oil level is low, add oil gradually while rechecking the level until it reaches the proper range.
Maintaining the correct engine oil level is vital for optimal engine performance and longevity.
In conclusion, performing the first oil change on your 2021 Jeep Cherokee is an essential maintenance task that should be completed every 7500 miles. By utilizing the correct tools and parts, following a step-by-step procedure, and checking the engine oil level, you can ensure that your vehicle continues to operate efficiently and reliably.
Remember to consult your vehicle’s owner’s manual and adhere to the manufacturer’s recommendations for the best results.
