Discover the secrets to transforming your Jeep Wrangler JK into the ultimate off-roading machine!
Join Phil as he embarks on an epic journey to remove the front and rear fender flares, unlocking increased vehicle clearance and unleashing unlimited adventures.
Uncover the step-by-step process, essential tools, and insider tips that will elevate your Jeep experience to new heights.
Get ready to conquer the trails like never before!
how to remove fender flares jeep wrangler jk
To remove the fender flares on a Jeep Wrangler JK, start by removing the front fender flares.
This can be done by removing the black pins and 10mm screws securing the flares.
There may also be clips that need to be disconnected, as well as the blinker light.
For the back fender flares, start by removing the pins and then yank the flares upward.
There may be clips inside the wheel well that need to be detached as well.
Removing the fender flares provides more vehicle clearance.
The entire process took approximately 45 minutes.
User Phil is asking for help specifically in removing the rear fender flare for repair.
Phil has a 2010 JK 4 Door Jeep Wrangler with a hardtop and a 2012 JK 2 Door Jeep Wrangler with a soft top.
Phil also mentioned push pins holding the liner and a strange plastic rivet-like fastener on the underside of the flare.
I hope this information helps you remove the fender flares from your Jeep Wrangler JK.
- Start by removing the front fender flares using black pins and 10mm screws
- Disconnect any clips and the blinker light associated with the front fender flares
- Remove the back fender flares by removing the pins and yanking them upward
- Detach any clips inside the wheel well associated with the back fender flares
- Removing the fender flares increases vehicle clearance
- The entire process takes approximately 45 minutes.
Check this out:
💡 Did You Know?
1. Did you know that Jeep Wrangler fender flares were first introduced in 1987 as a clever solution to comply with safety regulations requiring tires to be covered? These flares not only added style but also protected against debris and mud.
2. If you’re removing fender flares from your Jeep Wrangler JK, here’s an interesting fact: The original fender flares were made of thermoplastic, but aftermarket options nowadays range from metal to paintable PVC. So, you have a wide variety of choices to customize your Jeep!
3. When removing fender flares, keep in mind that some Jeep Wrangler JK models have hidden bolts beneath the hood. These bolts secure the flares to the body, so it’s important to check the owner’s manual or online resources to ensure you’re removing them correctly.
4. A little-known fact about removing fender flares on a Jeep Wrangler JK is that using a plastic pry tool or a heat gun can make the process easier. Applying gentle heat can help soften the adhesive, allowing you to detach the flares without damaging the paint or the flares themselves.
5. Jeep Wrangler fender flares aren’t just for cosmetic purposes. They actually provide a practical function by keeping the spray and debris from the tires away from the vehicle, reducing the risk of damage and making it easier to wash off dirt after an off-road adventure.
Removing Front Fender Flares: Black Pins, 10Mm Screws, Clips, Disconnecting Blinker Light
Removing the front fender flares on a Jeep Wrangler JK is a straightforward process that requires a few tools and some patience. Here are the steps to follow:
Gather the necessary tools: You will need a set of black pins, a 10mm socket or wrench, and basic hand tools.
Remove the black pins: Start by removing the black pins that secure the fender flare to the body of the Jeep. These pins can be easily pulled out by hand or with the assistance of a flathead screwdriver.
Loosen and remove the 10mm screws: Locate the 10mm screws that hold the fender flare in place and use the socket or wrench to loosen and remove them. Keep the screws in a safe place for later use.
Pry the clips loose: After removing the screws, you will notice that the fender flare is still attached to the Jeep by a series of clips. Carefully pry these clips loose using a flathead screwdriver or a trim removal tool. Take your time and apply gentle pressure to avoid damaging the clips or the flare itself.
Disconnect the blinker light: Finally, disconnect the blinker light located on the front fender flare. This can be done by either unplugging a connector or twisting and pulling the bulb socket out of the flare.
With the blinker light disconnected, you should now be able to fully remove the front fender flare from your Jeep Wrangler JK.
- Gather the necessary tools:
- Set of black pins
- 10mm socket or wrench
Basic hand tools
Remove the black pins that secure the fender flare to the body of the Jeep.
Loosen and remove the 10mm screws that hold the fender flare in place.
Pry the clips loose using a flathead screwdriver or a trim removal tool.
Disconnect the blinker light located on the front fender flare.
Removing Back Fender Flares: Pins, Yanking Upward, Clips Inside Wheel Well
To remove the rear fender flares on a Jeep Wrangler JK, follow these steps:
Locate and remove the pins that secure the fender flare to the body. These pins are found along the bottom edge of the flare. Use some effort to pull them out carefully.
Once the pins are removed, carefully pull upward on the flare to release it from the body. Avoid applying excessive force to prevent damage to the flare or the body of the Jeep.
After loosening the flare, remove the clips that hold it in place. These clips can be found on the inside of the wheel well. You can use a flathead screwdriver or a trim removal tool to pry them loose. Be cautious and gentle to avoid causing any damage.
With the clips removed, the flare should be free to be fully taken off the Jeep Wrangler JK.
Note: Remember to repeat these steps for the other rear fender flare if you are removing both.
Bullet point the steps to make them more clear:
Locate and remove the pins securing the fender flare to the body.
- Carefully pull upward on the flare to release it from the body.
- Remove the clips holding the flare in place.
- Take off the flare fully from the Jeep Wrangler JK.
Tip: When removing the rear fender flares of a Jeep Wrangler JK, it is important to be patient and gentle to prevent any potential damage.
Providing More Vehicle Clearance By Removing Fenders
One of the main reasons why Jeep Wrangler JK owners choose to remove their fender flares is to provide more vehicle clearance. This allows them to fit larger tires and achieve a more aggressive look for their Jeep. Additionally, removing the fenders can make it easier to access certain components for repairs or modifications. However, it’s important to note that removing the fender flares may affect the vehicle’s aerodynamics and can expose the body to more road debris and dirt.
- Increased vehicle clearance
- Ability to fit larger tires
- Achieve a more aggressive look
- Easier access to components for repairs or modifications
- Potential impact on aerodynamics
- Increased exposure to road debris and dirt
It is crucial to weigh the pros and cons before deciding to remove your fender flares.
Process Duration: Approximately 45 Minutes
The process of removing the fender flares on a Jeep Wrangler JK usually takes around 45 minutes to an hour. However, this timeframe can vary depending on your experience level and the condition of the flares. It is crucial to allocate enough time and avoid rushing the task.
Meticulousness and attention to detail are essential to prevent any potential damage.
For first-timers, it is recommended to allocate some extra time to become familiar with the removal process.
Finally, remember to work carefully to avoid unnecessary damage.
- Set aside at least 45 minutes to an hour for the task
- Work meticulously and pay attention to detail
- Allocate extra time for first-time removal to become familiar with the process.
User Seeking Help For Rear Fender Flare Repair
If you find yourself in need of repairing a rear fender flare on your Jeep Wrangler JK, it’s important to assess the extent of the damage before proceeding. In many cases, minor repairs can be done by simply replacing damaged clips or re-attaching loose parts. However, if the damage is significant or if the fender flare is cracked or broken, it may be necessary to purchase a replacement flare.
There are numerous online retailers that offer both OEM and aftermarket flares for Jeep Wranglers. For more complex repairs, it is recommended to consult a professional or seek advice from a Jeep community forum to ensure you are using the correct methods and tools.
- Assess the extent of the damage
- Consider minor repairs like replacing damaged clips or re-attaching loose parts
- Purchase a replacement flare if the damage is significant or the flare is cracked or broken
It is important to use the correct methods and tools for more complex repairs. Seek advice from professionals or Jeep community forums.
User’s Vehicle Details: 2010 JK 4 Door Jeep Wrangler With Hardtop, 2012 JK 2 Door Jeep Wrangler With Soft Top
Understanding the specifications of your Jeep Wrangler JK can be helpful when removing the fender flares. For users like Phil, who owns a 2010 JK 4 Door Jeep Wrangler with a hardtop and a 2012 JK 2 Door Jeep Wrangler with a soft top, the removal process will be similar but may vary slightly due to the different roof configurations. It is always recommended to consult the vehicle’s owner’s manual for specific instructions tailored to your Jeep’s model year and trim level.
User Mentioning Push Pins And Strange Plastic Rivet-Like Fastener
The mention of push pins and strange plastic rivet-like fasteners indicates that there may be additional components securing the fender flares. These fasteners are commonly found on Jeep Wrangler JK models and are used to provide added stability and prevent the flares from rattling.
To remove these fasteners, it is necessary to carefully push them in or pry them up using a trim removal tool. Once they are disengaged, the fender flares should be free to remove as outlined in the previous sections.
- The fasteners used on Jeep Wrangler JK models provide added stability and prevent flares from rattling.
- To remove these fasteners, use a trim removal tool to carefully push them in or pry them up.
- Once disengaged, the fender flares can be easily removed.
Note: Proper removal of fasteners is crucial to avoid damaging the fender flares.
User’s Name Is Phil
Lastly, it’s important to emphasize that the user seeking assistance with removing the rear fender flare and repair is named Phil. Understanding the process and the specifics of your vehicle is essential to ensure successful removal and repair of the fender flare. Should you encounter any difficulties or have further questions, consulting the owner’s manual or seeking advice from fellow Jeep enthusiasts can prove to be beneficial. Remember to approach the task with patience and caution to avoid causing any unnecessary damage.
Do jeeps need fender flares?
Yes, fender flares are essential for Jeeps. Not only do they protect your Jeep’s body from debris kicked up by wider tires, but they also ensure the safety of others around you. Fender flares provide the necessary coverage to meet legal requirements, keeping you on the right side of the law while adding an extra layer of protection to your vehicle.
1. What are the possible steps involved in removing fender flares from a Jeep Wrangler JK?
To remove fender flares from a Jeep Wrangler JK, the first step is to remove the plastic clips or screws that secure the flares to the body of the vehicle. These are usually located around the edges of the flares and can be unscrewed or gently pried out with a flathead screwdriver. Once the clips or screws are removed, the next step is to gently pull the flares away from the body, being careful not to force or break any tabs or connectors that may be holding them in place. It may be helpful to use a trim removal tool or a plastic spatula to gently pry the flares loose if they are stuck. After the flares are removed, any residual adhesive or clips can be cleaned and the new flares or modifications can be installed if desired.
2. Are there any specific tools or equipment required to remove fender flares from a Jeep Wrangler JK?
Removing fender flares from a Jeep Wrangler JK typically requires a few specific tools and equipment. Firstly, it is important to have a set of screwdrivers or wrenches, depending on the type of bolts or clips used to attach the fender flares. Additionally, a trim removal tool or a plastic prying tool can be useful to gently pry the flares away from the body without causing any damage. It is also recommended to have a container or bag to store the removed bolts or clips to prevent them from getting lost. Overall, while not overly complicated, having these tools and equipment handy can make the process of removing fender flares from a Jeep Wrangler JK easier and more efficient.
3. Are there any potential challenges or problems to be aware of when removing fender flares from a Jeep Wrangler JK?
When removing fender flares from a Jeep Wrangler JK, there can be a few potential challenges or problems to be aware of. Firstly, the fender flares are often attached using bolts and clips that may have become rusted or seized over time. This can make the removal process more difficult and may require the use of penetrating oil or additional tools to loosen them.
Secondly, removing the fender flares can leave behind holes or marks on the body of the Jeep. These holes may need to be filled or covered after the flares are removed to maintain the aesthetic appeal and protect the body from potential damage.
Overall, while removing fender flares from a Jeep Wrangler JK may be a relatively straightforward task, it is important to be prepared for potential challenges such as rusted bolts and the need for additional repairs or modifications after the removal process.