How to Reset Jeep Compass Screen for Enhanced Driving Experience?
Are you tired of staring at a frozen or glitchy screen on your Jeep Compass?
Don’t worry, we’ve got you covered.
In this article, we’ll explore various methods to reset the Jeep Compass screen and get your UConnect system back on track.
From soft resets to software updates, we’ve got all the solutions you need to restore your screen to its former glory.
So, buckle up and let’s get started on this troubleshooting journey!
how to reset jeep compass screen
To reset the Jeep Compass screen, you can try several methods.
First, turn off the vehicle and do a soft reset of the UConnect system by pressing and holding the Power/Volume and Enter/Tune buttons for 15-20 seconds until the Jeep splash screen appears.
If that doesn’t work, remove a pen drive from the Jeep Compass and connect it to a computer to free up space before re-inserting it into the vehicle’s USB port.
Another option is to use an Android or iOS device to make a call while the engine is running, which wakes up the touch screen.
From there, access the Vehicle Settings icon, navigate to the Reset option, and restore settings to default, clear personal data, and restart the engine.
Making a call from a connected phone can also be attempted.
If those methods fail, start the Jeep Compass in Accessories Mode by pressing the engine Start/Stop button without pressing the Brake pedal and holding down the Volume and Enter/Browse buttons for 10-15 seconds.
This will initiate a reset of the UConnect system and turn the touch screen back on.
If none of these solutions work, it may be necessary to update the UConnect software, check and replug the fuses, address any faulty hardware issues, or seek assistance from a technician or dealership.
Key Points:
- Turn off the vehicle and do a soft reset by pressing and holding the Power/Volume and Enter/Tune buttons
- Remove a pen drive and connect it to a computer to free up space before re-inserting it
- Make a call from an Android or iOS device while the engine is running to wake up the touch screen
- Access the Vehicle Settings icon, navigate to the Reset option, and restore settings to default, clear personal data, and restart the engine
- Try making a call from a connected phone
- Start the Jeep Compass in Accessories Mode by pressing the engine Start/Stop button without pressing the Brake pedal and holding down the Volume and Enter/Browse buttons
- If all else fails, update the UConnect software, check fuses, address faulty hardware, or seek assistance from a technician or dealership.
Check this out:
💡 Did You Know?
1. The Jeep Compass actually does not have a dedicated touchscreen reset option. However, you can perform a soft reset by pressing and holding the volume button and tuner knob simultaneously for 10 seconds.
2. Did you know that the Jeep Compass comes with a secret diagnostic menu? By pressing and holding the “back” and “audio” buttons on the steering wheel simultaneously for around 10 seconds, you can access a hidden menu displaying various diagnostic information about your vehicle.
3. The Jeep Compass screen is not just a screen – it’s a Uconnect system. The Uconnect system uses an infotainment platform that integrates features like navigation, entertainment, and communication in one user-friendly interface.
4. The Jeep Compass screen can be customized to display various information. You can personalize the home screen, rearrange icons, and even choose between different themes to create your preferred display.
5. There is an Easter Egg hidden within the Jeep Compass screen. If you tap on the corner of the screen four times, a small Jeep icon will appear, and by tapping it, you will unlock a hidden screen with a variety of digital drawings and animations related to Jeep.
1. Soft Reset Of Uconnect System
One of the simplest methods to reset the Jeep Compass screen is to perform a soft reset of the UConnect system. To do this, follow these steps:
- Start by turning off the vehicle.
- Next, press and hold the Power/Volume and Enter/Tune buttons simultaneously for 15-20 seconds until the Jeep splash screen appears.
- Repeat this process if necessary.
The soft reset will refresh the system and often resolves minor glitches or unresponsiveness.
Note: Performing a soft reset can be an effective solution for common issues with the Jeep Compass screen.
2. Clearing Space On A Pen Drive
If you have a pen drive connected to the Jeep Compass, it is essential to ensure that there is sufficient free space on it. To do this, follow these steps:
- Remove the pen drive from the vehicle.
- Insert the pen drive into a computer.
- Delete any unnecessary files or applications to free up space.
- Once cleared, re-insert the pen drive into the vehicle’s USB port.
Insufficient space on the pen drive can sometimes cause the touch screen to freeze or become unresponsive. So, make sure to keep enough free space to avoid any issues.
3. Resetting Through An Android Or iOS Device
Another method to reset the Jeep Compass screen involves using an Android or iOS device. Start by making a call from the connected device while the engine is running. This action activates the touch screen for approximately 30 seconds. Take advantage of this brief window to access the Vehicle Settings icon. Navigate to the Reset option and initiate a reset that restores settings to default, clears personal data, and restarts the engine. This can often resolve issues related to the touch screen.
4. Making A Call From A Connected Phone
If the above method does not yield the desired results, try making a call from a connected phone. This action can sometimes wake up the touch screen and restore its functionality. While this may seem like a simple solution, it has proven effective for some Jeep Compass owners experiencing screen issues.
5. Resetting The Uconnect System In Accessories Mode
Accessories Mode (ACC Mode) is a state in which the accessories within the vehicle can be operated without starting the engine. To reset the UConnect system in Accessories Mode:
- Press the engine Start/Stop button without pressing the Brake pedal.
- Hold down the Volume button located under the rear surface of the steering wheel on the right-hand side.
- Simultaneously hold down the Enter/Browse button located in the middle of the left-hand media controls for 10-15 seconds.
The UConnect system will reset, and the touch screen will turn back on, restoring functionality.
For easy reference, here are the steps to reset the UConnect system in Accessories Mode:
- Press the engine Start/Stop button without pressing the Brake pedal.
- Hold down the Volume button located under the rear surface of the steering wheel on the right-hand side.
- Simultaneously hold down the Enter/Browse button located in the middle of the left-hand media controls for 10-15 seconds.
“The UConnect system will reset, and the touch screen will turn back on, restoring functionality.”
6. Disconnecting And Reconnecting The Battery
If other methods fail, disconnecting and reconnecting the battery can often resolve touch screen issues in the Jeep Compass.
To do this:
- Begin by disconnecting both the negative (black) and positive (red) terminals from the battery.
- Leave them disconnected for 5-10 minutes to allow the system to discharge.
- Afterward, reconnect the terminals and start the vehicle.
This process resets the electrical system and can often resolve underlying issues causing the screen to malfunction.
7. Updating Uconnect Software/Firmware
Keeping the UConnect software up to date is vital for the optimal performance of the Jeep Compass screen. To update the software, follow these steps:
- Check for available updates on the UConnect portal using the vehicle’s VIN.
- Alternatively, you can also visit a Jeep service center for assistance.
Updating the software or reinstalling the firmware can provide several benefits, including:
- Fixing bugs that may affect the system’s functionality.
- Improving performance by optimizing the software.
- Resolving compatibility issues with the touch screen.
Remember, regularly updating the UConnect software ensures that your Jeep Compass screen operates smoothly and efficiently.
8. Troubleshooting Touch Screen And Radio Issues
If none of the above methods resolve the screen issues, it may be necessary to troubleshoot touch screen and radio-related problems. Start by unplugging and replugging the fuses to ensure there are no power supply issues. Locate the fuse corresponding to the infotainment system and replace it if blown. If the touch screen itself is faulty, it may need to be repaired or replaced. Additionally, check for any issues with the radio, including faulty antenna connections, poor reception, or internal problems. Inspect and repair damaged or loose wiring and check speakers and the antenna for any damage.
Tip: When troubleshooting touch screen and radio issues, it’s important to cover all possible areas of concern and address them accordingly.
- Soft reset
- Clear space on a pen drive
- Resetting through a connected phone or iOS device
- Resetting in Accessories Mode
- Disconnecting and reconnecting the battery
- Updating UConnect software
By following these techniques, Jeep Compass owners can unlock the full potential of their infotainment system and enjoy a seamless driving experience once again.
FAQ
Why is the screen in my Jeep Compass not working?
If the screen in your Jeep Compass is not working, it could be due to outdated Uconnect software. It is important to make sure that your Uconnect system is running the latest software version, as outdated software can lead to screen malfunctions. Another possible reason for the screen not working could be a loose connection to the Uconnect system. To troubleshoot this, you can check if any cables or connectors are loose behind the infotainment system. However, it is important to note that handling the connections behind the system may require some technical knowledge, so it’s recommended to seek professional assistance if needed.
How do you reset the infotainment system on a Jeep Compass?
To reset the infotainment system on a Jeep Compass, ensure the engine is running and the car is parked. Proceed to locate the volume and tuner knobs, then firmly press and hold both knobs simultaneously for approximately 10-20 seconds. Once the screen goes blank, release the knobs and patiently wait for the system to automatically reboot itself.
How to do a hard reset on a Jeep?
To perform a hard reset on a Jeep, begin by simultaneously pressing and holding the volume and power buttons on the infotainment system for about five seconds. This action will initiate a menu on the screen, where you can navigate to the desired option for a hard reset. Restoring your Jeep’s Uconnect system to its default settings can help resolve any software or connectivity issues you may be experiencing, ensuring a fresh start for your vehicle’s infotainment system.
What are the steps to perform a factory reset on a Jeep Compass touchscreen?
Performing a factory reset on the touchscreen of a Jeep Compass typically involves a few simple steps. Firstly, you’ll need to locate the settings menu on the touchscreen. Once you’ve found it, navigate to the “System” or “Reset” section. From there, select the “Factory Reset” option and confirm your decision when prompted. It’s important to note that performing a factory reset will erase all data and settings, so backing up any important information beforehand is advisable. After the reset is complete, the touchscreen should revert to its original factory settings.
