Are you tired of the dreaded air suspension issues on your beloved Jeep Grand Cherokee?
Well, fret no more!
In this article, we’re going to dive into the world of disabling the air suspension system.
We’ll explore the vital need to check the pop-off valve, and reveal a handy method to temporarily disable the system.
Get ready to bid farewell to those suspension troubles!
how to disable air suspension on jeep grand cherokee
To disable the air suspension on a Jeep Grand Cherokee, you can try holding down both the “up and down” select terrain buttons simultaneously for a few seconds.
This should temporarily disable the system, and it will reset and start working again once the vehicle is driven over 5 mph.
However, it is important to note that I cannot confirm the effectiveness of this method as I have not personally tried it.
It is always recommended to consult the vehicle’s manual or a professional mechanic for accurate and reliable information on disabling the air suspension system.
- Hold down the “up and down” select terrain buttons simultaneously
- This will temporarily disable the air suspension system
- The system will reset and start working again after driving over 5 mph
- Effectiveness of this method is not confirmed
- Consult the vehicle’s manual or a professional mechanic for accurate information
- Always seek reliable information for disabling the air suspension system.
Check this out:
💡 Did You Know?
1. Did you know that the Jeep Grand Cherokee was the first SUV to feature a four-wheel independent suspension system, including air suspension, when it was introduced in 1993?
2. While most Jeep Grand Cherokee models come equipped with air suspension, there is a way to disable it. By locating and removing the air suspension fuse in the engine compartment fuse box, the system will be deactivated.
3. Disabling the air suspension on a Jeep Grand Cherokee may lead to a slightly harsher ride as the system is designed to improve comfort and off-road capability by adjusting the vehicle’s height and stiffness.
4. One benefit of disabling the air suspension is increased ground clearance, which can be advantageous when driving off-road or on rough terrain.
5. It’s worth noting that disabling the air suspension system on a Jeep Grand Cherokee is typically done when there is a malfunction or the system requires repair. If you choose to disable it, it’s recommended to have the system checked by a professional to ensure proper functionality and safety.
Introduction: Disabling The Air Suspension On Jeep Grand Cherokee
The air suspension system in the Jeep Grand Cherokee offers a smooth and comfortable ride, but it can sometimes be a source of frustration and expensive repairs. Whether you are experiencing issues with the system or simply prefer a traditional suspension, this article will guide you through the process of disabling the air suspension on your Jeep Grand Cherokee. We will cover important considerations and a step-by-step method to ensure a safe and effective disablement.
Importance Of Checking The Pop-Off Valve
Before we start the process of disabling the air suspension, it is important to emphasize the significance of checking the pop-off valve. This valve plays a vital role in releasing excess pressure and safeguarding the pump from burnout. Failure of the pop-off valve to function properly can result in the pump continuing to operate even when the suspension system is disabled, leading to irreversible damage.
To prevent any potential issues, it is highly recommended to regularly inspect the pop-off valve and ensure it is in optimal working condition. If you notice any indications of wear or leakage, it is advisable to replace the valve immediately. By taking this proactive measure, you can prevent expensive repairs and prolong the lifespan of your air suspension system.
Pump Not Starting: Letting It Cool Off
In some instances, you may find that the pump does not start working immediately after disabling the air suspension. This can be a cause for concern, but it is important to exercise patience and let the pump cool off before attempting to restart it. The air suspension pump can become hot during operation, and providing it with sufficient time to cool down can help prevent burnout or damage.
If you encounter this situation, resist the temptation to repeatedly activate the pump or engage in any troubleshooting measures. Instead, allow the pump to cool naturally until it reaches a safe operating temperature. Once cooled, the system will typically resume normal functionality, and you can proceed with confidence.
Unknown Location Of Pop-Off Valve
It is important to note that the specific location of the pop-off valve may vary depending on the Jeep Grand Cherokee model and year. While we would ideally provide precise instructions, we must acknowledge that the author’s knowledge regarding the valve’s location is limited.
However, in an unfortunate incident, a shop discovered the valve’s location the hard way when they failed to put the vehicle into service mode. Their lucky escape from a burned-out pump motivated us to share this cautionary tale.
To ensure a successful disablement of the air suspension system:
* Consult the vehicle’s user manual or seek assistance from an experienced mechanic who can accurately locate and inspect the pop-off valve for you.
* Taking this precautionary step will minimize the risk of any mishaps or mistakes during the disablement process.
“To ensure a successful disablement of the air suspension system, we recommend consulting the vehicle’s user manual or seeking assistance from an experienced mechanic who can accurately locate and inspect the pop-off valve for you. Taking this precautionary step will minimize the risk of any mishaps or mistakes during the disablement process.”
Luck In Preventing Pump Burnout
The experience of a shop highlights the importance of properly disabling the air suspension system. Failure to put the vehicle into service mode could have resulted in a burned-out pump. Luckily, they managed to prevent significant damage, but relying on luck alone is not a reliable approach for the longevity and functionality of your air suspension system.
To mitigate the risk of pump burnout, it is crucial to follow the correct disablement procedure. The subsequent section outlines the steps you should take to ensure the integrity of your Jeep Grand Cherokee’s air suspension. By doing so, you can enjoy peace of mind knowing that you are taking essential precautions.
Method: Holding Select Terrain Buttons
To disable the air suspension on your Jeep Grand Cherokee, follow these steps:
- Hold down both the “up” and “down” select terrain buttons simultaneously.
- The duration of the button press required may vary depending on the exact model and year of your vehicle.
- Consult the vehicle’s user manual or seek guidance from a qualified Jeep technician for accurate instructions specific to your model.
During the temporary disablement, the air suspension system will be inactive, and the suspension will assume a fixed position. However, it is important to note that this is not a permanent solution. Once the Jeep Grand Cherokee exceeds a speed of 5 mph, the system will reset, and the air suspension will regain functionality.
Therefore, exercise caution and do not rely on the temporary disablement for prolonged periods or critical driving situations.
- Remember to consult the vehicle’s user manual or seek guidance from a qualified Jeep technician for accurate instructions.
- Exercise caution and do not rely on the temporary disablement for prolonged periods or critical driving situations.
Temporary Disablement: Resetting At 5 Mph
It is important to note that the method discussed above only disables the air suspension temporarily. As mentioned, once the vehicle is driven over 5 mph, the system will reset, and the air suspension will reactivate. Therefore, it is crucial to keep this in mind and avoid relying on the temporary disablement option for extended periods or emergency situations.
To ensure a safe driving experience, it is recommended to address any underlying issues with the air suspension or consult a qualified mechanic for a permanent solution if desired. By doing so, you can restore the full functionality of your Jeep Grand Cherokee’s air suspension system and enjoy a smooth and comfortable ride without compromise.
- It is important to disable the air suspension temporarily only.
- The system will reset and reactivate once the vehicle is driven over 5 mph.
- Avoid relying on the temporary disablement option for extended periods or emergencies.
- Address underlying issues or consult a qualified mechanic for permanent solutions.
Call For Feedback: Has Anyone Tried This Method?
As we conclude this article, we would like to invite readers who have experience with disabling the air suspension on their Jeep Grand Cherokee to share their feedback. If you have attempted the method described in this article or have alternative methods that have proven successful, we would love to hear from you.
By sharing your insights and experiences, we can create a community of knowledge that empowers Jeep Grand Cherokee owners to make informed decisions about their air suspension systems. Please feel free to leave a comment or get in touch with our team to contribute your valuable feedback.
Remember, when dealing with any modifications or disablements of your vehicle’s systems, it is always recommended to consult the manufacturer’s guidelines and seek professional assistance when needed.
Can you turn off air suspension?
Yes, you can turn off air suspension by using the suspension switch. This switch is typically found either in the trunk or on the right side of the passenger footwell. Before jacking or lifting a vehicle with air suspension, it is crucial to first turn off the suspension switch to ensure the safety and integrity of the system. By doing so, you can prevent any unintended adjustments or damage to the suspension components.
How do you reset the air suspension on a Jeep?
To reset the air suspension on a Jeep, begin by disconnecting the battery terminals in the proper sequence, starting with the negative terminal followed by the positive one. Afterward, locate and remove the F05, F50, and F87 fuses from the fuse box associated with the air suspension components. Allow a few minutes to pass before reconnecting the battery terminals, ensuring the positive terminal is connected first, followed by the negative one. This process enables the air suspension system to reset and recalibrate itself, promoting optimal functionality.
Can I drive my car without air suspension?
It is not advisable to drive your car without air suspension if it is broken. The air suspension plays a crucial role in maintaining a smooth and stable ride, so driving without it can compromise your safety. A malfunctioning air suspension system can negatively impact the handling and stability of the vehicle, making it more difficult to control and maneuver, especially during sudden stops or turns. As such, it is best to get the air suspension fixed before driving your car to ensure optimal safety on the road.
Can you drive without air ride suspension?
Yes, driving a car without air ride suspension is not only possible but also quite common. While air suspension offers a smooth and adjustable ride, many vehicles are equipped with alternative suspension systems such as coil springs or torsion bars. These systems provide adequate support and stability, ensuring a functional and comfortable driving experience without the need for an air compressor to maintain the desired ride height. Therefore, not having air ride suspension does not hinder one’s ability to operate a car effectively.