Where is the Starter on a 2018 Jeep Compass?
Are you ready to take your 2018 Jeep Compass on an epic adventure, only to find yourself stumped by a mysteriously malfunctioning starter?
Fear not, as we have the solution to your vehicular woes.
In this article, we will delve into the depths of your Jeep’s engine bay, guiding you step-by-step on how to replace that elusive starter.
So, grab your tools and prepare to embark on a mechanical journey like no other.
where is the starter on a 2018 jeep compass
The starter on a 2018 Jeep Compass is located on the bottom of the engine towards the front.
It can be accessed by removing some of the surrounding components, such as the gimbal if necessary.
To remove the old starter, disconnect the battery first, then loosen the fasteners holding the starter in place.
Disconnect the power cables and carefully remove the starter.
When installing the new starter, make sure to mount it properly and securely.
Pay attention to connecting the connectors correctly.
After reconnecting the battery, test the starter to ensure it is working properly.
Key Points:
- The starter on a 2018 Jeep Compass is located on the bottom of the engine towards the front.
- It can be accessed by removing surrounding components, such as the gimbal if necessary.
- To remove the old starter, disconnect the battery first, then loosen the fasteners holding it in place.
- Disconnect the power cables and carefully remove the starter.
- When installing the new starter, make sure to mount it properly and securely.
- Pay attention to connecting the connectors correctly.
- After reconnecting the battery, test the starter to ensure it is working properly.
Check this out:
💡 Did You Know?
1. The starter on a 2018 Jeep Compass is located on the passenger side of the engine block, near the transmission bellhousing.
2. Did you know that the starter motor in most modern vehicles is typically only about the size of a toaster? Despite its small size, it plays a crucial role in starting the engine.
3. The starter in a car essentially works by using an electric motor to crank the engine and get it running. It uses a gear mechanism called a Bendix drive, which engages the flywheel to turn the engine.
4. In the early days of automobiles, electric starters were only introduced in the early 1910s. Prior to this, drivers had to manually hand-crank the engine to start the car, which often proved difficult and dangerous.
5. Some vintage cars, including certain Jeep models, had a unique starting procedure known as “sergeant-cranking.” This involved turning the ignition key while simultaneously hand-cranking the engine, providing an extra boost to start the car.
Problem With The Starter On A 2018 Jeep Compass
The 2018 Jeep Compass has gained praise for its stylish design, impressive performance, and innovative features. However, it is not immune to flaws. One issue that some owners have experienced is a problem with the starter. This component, responsible for initiating the engine’s combustion cycle, can develop faults over time, resulting in a frustrating and potentially hazardous situation for drivers.
Starter With A Hole And Falling Pieces
One Jeep Compass owner recently experienced a particularly concerning issue with their starter. Upon inspecting the component, they discovered a distressing sight – a hole in the side of the starter, with small pieces falling out. Such a visual inspection indicates severe damage to the starter, which could not only hinder its proper functioning but also pose a safety risk. If left unaddressed, it could result in a complete failure of the starter, leaving the vehicle immobile and the driver stranded.
- Severe damage to the starter
- Safety risk
- Potential complete failure
- Vehicle immobility and driver stranded
Car Acting Like It Wants To Keep Starting
In addition to the visible damage on the starter, the Jeep Compass owner noticed an unusual behavior from their vehicle’s engine. After turning off the car, it would intermittently act as if it wanted to keep starting, repeatedly attempting to initiate the combustion cycle. This puzzling phenomenon raised concerns about the overall health of the vehicle’s electrical system and highlighted the urgent need to address the faulty starter.
Seeking Advice On Removing The Old Starter
In light of the critical condition of the starter, the owner of a Jeep Compass is seeking advice on how to remove the old component and install a new one. The removal process can be challenging, particularly if there are other auto parts obstructing access to the starter. The owner also expressed uncertainty about the amount of junk that needs to be cleared to reach the starter.
Key points:
- The starter in the Jeep Compass is in a critical condition and needs to be replaced.
- Removing the old starter and installing a new one can be challenging.
- Access to the starter may be obstructed by other auto parts.
- The owner is unsure about how much junk needs to be cleared to reach the starter.
Quote: “The removal process can be a challenge, especially if there are other auto parts obstructing access to the starter.”
Junk In The Way And Uncertainty About Removal
Navigating through the intricacies of a vehicle’s engine can be a daunting task, especially when faced with obstructions and unknowns. In this case, the Jeep Compass owner is unsure about the amount of debris or other auto parts that need to be cleared to gain access to the faulty starter. This uncertainty adds to the complexity of the job and highlights the importance of thorough research and guidance.
No Haynes Manual Available For Reference
When encountering a mechanical challenge, like the need for a starter replacement, car owners often rely on trusted manuals such as the Haynes Manual. Unfortunately, Jeep Compass owners of the 2018 model year are faced with the disappointment of not having a dedicated Haynes Manual for their specific vehicle. This absence complicates their ability to confidently address the starter issue. As a result, owners are compelled to search for alternative sources of information in order to successfully carry out the necessary repair.
Instructions For Replacing The Starter
Replacing the starter on a 2018 Jeep Compass can be successfully done by individuals with basic mechanical knowledge and the right tools.
To start, disconnect the vehicle’s battery before beginning any work. This crucial step ensures safety and prevents any unintended electrical incidents during the repair process.
Procedure Accessible To Individuals With Basic Knowledge And Right Tools
Once the battery is disconnected, the next step is to loosen the fasteners that hold the old starter in place. This can typically be accomplished using basic hand tools such as wrenches and sockets. Careful attention should be given to ensure all fasteners are properly loosened and removed without causing any damage to surrounding components.
- Start by disconnecting the battery
- Use wrenches and sockets to loosen the fasteners
- Pay careful attention to avoid damage
Note: Safely removing the old starter is crucial to avoid any complications during the replacement process.
Disconnecting The Battery Before Starting
Before beginning the removal process, disconnect the vehicle’s battery as a precautionary measure. This is crucial to prevent any potential electrical mishaps such as sparks or power surges, which could result in injury or damage to the vehicle’s electrical system. Ensuring safety is always the top priority when handling a vehicle’s electrical components.
Loosening Fasteners Holding The Starter
Once the battery is disconnected, the next step is to loosen the fasteners that secure the starter in place. It is important to use a combination of different-sized wrenches and sockets to efficiently remove these fasteners. Care should be taken to avoid stripping the bolts or damaging the surrounding components during this step.
Disconnecting Power Cables
After loosening the fasteners, the next step is to disconnect the power cables that are connected to the starter. These cables are responsible for delivering the necessary electrical current required to start the vehicle’s engine. It is crucial to ensure that all power cables are properly disconnected to prevent any accidental electrical discharges.
Potentially Removing Other Auto Parts Like The Gimbal
Depending on the specific configuration of the Jeep Compass, it may be necessary to remove additional auto parts, such as the gimbal, to gain sufficient access to the starter. It is important to consult the vehicle’s documentation or seek professional advice to determine the appropriate steps and precautions to take when removing such components. Care should be taken to avoid causing any unnecessary damage or complications during this process.
Mounting The New Starter Carefully
Once the old starter is successfully removed, the new starter should be mounted carefully in its place. Ensuring proper alignment and secure fastening of the starter is crucial for its optimal performance. Any misalignment or improper installation could result in further issues or premature failure of the new starter.
- Make sure the old starter is successfully removed
- Carefully mount the new starter
- Ensure proper alignment and secure fastening
- Avoid misalignment and improper installation
“Proper alignment and secure fastening of the starter are crucial for its optimal performance.”
Properly Connecting The Connectors
With the new starter securely in place, it is crucial to properly connect the electrical connectors. These connectors play a vital role in delivering the necessary electrical current to the starter. Incorrect or inadequate connection of the connectors can lead to a faulty electrical supply, which can directly affect the starter’s ability to function effectively.
Testing The Starter After Reconnecting The Battery
After all connections have been made and the battery is reconnected, it is essential to test the new starter. This can be done by turning the ignition key and observing the starter’s performance. If the engine turns over smoothly and the vehicle starts without any issues, it indicates a successful replacement. However, if any problems persist, further troubleshooting or professional assistance may be required to identify and address the underlying cause.
In conclusion, the starter on a 2018 Jeep Compass can experience various issues, ranging from visible damage to abnormal behavior.
- While the removal and replacement process may seem daunting, individuals with basic mechanical knowledge and the right tools can tackle this task.
- Disconnect the battery before starting any work.
- Loosen the fasteners holding the starter in place.
- Properly connect the electrical cables to ensure proper functioning.
Remember to prioritize safety, consult reliable resources, and seek professional assistance if needed throughout this process.
FAQ
How much does it cost to replace a starter on a 2018 Jeep Compass?
The cost of replacing a starter on a 2018 Jeep Compass falls within the range of $440 to $551. This estimate includes both labor and parts expenses, with labor costs ranging from $112 to $141, and parts costs ranging from $307 to $410. It is always recommended to consult with a mechanic or dealership for an accurate price quote based on your specific circumstances.
Where is my starter located?
The location of your starter depends on the type of vehicle you have. For rear-wheel drive vehicles, you can typically find the starter on the passenger’s side of the engine, beneath the exhaust manifold. However, for front-wheel drive vehicles, it is recommended to check on the driver’s side above the transmission or below the exhaust manifold. In some cases, the starter may also be located just under the intake manifold. To pinpoint the exact location of your starter, referring to your vehicle’s manual or consulting a professional mechanic would be helpful.
How do I know if my starter is bad on my Jeep?
If your Jeep refuses to start when you turn the key or push the start button, it’s likely a sign of a faulty starter. Another indication of a bad starter is if you hear strange noises like clinks, grinds, or whirs. These sounds should not be ignored as they could potentially cause damage to the engine flywheel if left unchecked.
What is the exact location of the starter on a 2018 Jeep Compass?
The starter on a 2018 Jeep Compass is located on the engine block, near the bottom front area. It is typically positioned between the engine and transmission, close to the flywheel or flexplate. The exact position may vary slightly depending on the specific model and engine configuration of the vehicle.
