Immerse yourself in the world of Jeep and embark on an exhilarating adventure with the 2019 Jeep Cherokee. But there’s a catch – imagine cruising through breathtaking landscapes, only to be interrupted by the abrupt cessation of your engine’s roar.
Fret not! In this article, we unravel the secret to unlocking unlimited freedom, allowing you to bid farewell to the Auto Start-Stop feature that haunts your every joyride.
Discover the power of rebellion as we delve into the mechanisms behind disabling this notorious function, shedding light on the true purpose behind its existence. Prepare to embrace the untamed spirit of the Jeep Cherokee and reclaim the true essence of automotive bliss.
2019 jeep cherokee auto start stop disable
To disable the Auto Start-Stop feature on a 2019 Jeep Cherokee, you can either unplug the Intelligent Battery Sensor (IBS) plug connected to the negative terminal of the main 12V battery or unplug the wire beneath the button-type sensor that detects the closing of the hood. For the Jeep Wrangler, the method may be slightly different.
When starting the vehicle, there may be a brief alert on the instrument cluster screen, but it disappears after a few seconds. Please note that disabling the feature is temporary and can be done for as long as desired.
Additionally, pressing and holding the start/stop button for about five seconds can turn off the stop/start feature. Another option is to use the A Off button next to the gear shifter.
It’s important to understand that the Auto Start-Stop feature is primarily designed to reduce fleet emissions and may improve fuel efficiency by more than 8%, according to a Society of Automotive Engineers study.
- Auto Start-Stop feature on a 2019 Jeep Cherokee can be disabled by unplugging the Intelligent Battery Sensor (IBS) plug or unplug the wire beneath the button-type sensor for the hood
- Method to disable the feature on Jeep Wrangler may vary
- Brief alert on instrument cluster screen may appear when starting the vehicle, but it disappears after a few seconds
- Disabling the feature is temporary and can be done for as long as desired
- Stop/start feature can also be turned off by pressing and holding the start/stop button for about five seconds or using the A Off button next to the gear shifter
- Auto Start-Stop feature is primarily designed to reduce fleet emissions and may improve fuel efficiency by more than 8% according to a Society of Automotive Engineers study
Check this out:
💡 Pro Tips:
1. To permanently disable the Auto Start-Stop feature on a 2019 Jeep Cherokee, you can use a diagnostic tool to modify the vehicle’s settings.
2. If you don’t want to permanently disable the feature, you can simply press the A Off button next to the gear shifter to turn off Auto Stop temporarily.
3. If you prefer a manual solution, you can install a Start-Stop Disable module that completely overrides the auto start-stop function.
4. Keep in mind that disabling the Auto Start-Stop feature may void your vehicle’s warranty, so proceed with caution.
5. If you’re not comfortable disabling the feature yourself, consider consulting with a professional mechanic or contacting your local Jeep dealership for assistance.
Purpose Of Auto Start-Stop Feature On Jeep Vehicles
The Auto Start-Stop feature found in Jeep Cherokee, Grand Cherokee, Wrangler, and Compass vehicles is designed primarily to reduce fleet emissions for the auto manufacturer. While it may seem like a feature that could save users money on gas, its main purpose is to meet government emissions regulations and contribute to a greener environment.
Contrary to popular belief, the primary goal of this feature is not to save fuel or reduce expenses for drivers, but rather to minimize the carbon footprint of the vehicles produced by the auto manufacturer. By automatically shutting off the engine when the vehicle comes to a stop, such as in traffic or at a red light, the feature effectively cuts down on emissions during idle periods.
Disabling Auto Start-Stop On Jeep Wrangler
If you own a Jeep Wrangler and wish to disable the Auto Start-Stop feature, the process may be slightly different from other Jeep models. Instead of disconnecting the Intelligent Battery Sensor (IBS) plug, as is the case with other models, disabling the feature on a Wrangler involves unplugging the wire beneath the button type sensor that detects when the hood is closed.
While the method may vary, the end result is the same – the disabling of the Auto Start-Stop feature on your Jeep Wrangler. By disconnecting the relevant wire or sensor, you effectively prevent the engine from shutting off when the vehicle comes to a stop.
Disabling Auto Start-Stop On Other Jeep Models
For other Jeep models like the Cherokee, Grand Cherokee, and Compass, disabling the Auto Start-Stop feature is a relatively straightforward process. The feature can be disabled by unplugging the Intelligent Battery Sensor (IBS) plug connected to the negative terminal of the main 12V battery.
Alternatively, some models may have a wire beneath the button type sensor that detects the closing of the hood.
By disconnecting either the IBS plug or the relevant wire, you effectively disable the Auto Start-Stop feature on your Jeep. This will prevent the engine from shutting off when the vehicle comes to a stop, offering a seamless driving experience without the interruptions caused by the start-stop feature.
Alert On Instrument Cluster Screen
When you start your Jeep after disabling the Auto Start-Stop feature, there may be a brief alert on the instrument cluster screen. However, this alert disappears within a few seconds and should not cause any concern.
It serves as a reminder that the feature has been disabled and should not affect the functionality of the vehicle.
It is important to note that disabling the Auto Start-Stop feature does not impact the overall performance or safety of the Jeep. The feature is designed to enhance fuel efficiency by reducing idle time, but its absence does not compromise the vehicle’s capabilities.
Important Role Of Intelligent Battery Sensor (IBS)
The Intelligent Battery Sensor (IBS) plays a crucial role in analyzing battery parameters and improving diagnostic capabilities in Jeep vehicles. It helps the vehicle’s system monitor the battery’s condition, voltage, and other important factors.
Although it is necessary to disconnect the IBS plug to disable the Auto Start-Stop feature, it is recommended to consult the vehicle’s manual or seek professional assistance to ensure proper disconnection and avoid any potential issues with the battery or diagnostic capabilities.
Turning Off Auto Stop On Jeep Cherokee
With the Auto Start-Stop feature on a Jeep Cherokee, it is possible to temporarily turn off the feature by pressing and holding the start/stop button for about five seconds. However, it is important to note that this is not a permanent solution and the feature will be reactivated the next time the vehicle is started.
To disable the Auto Start-Stop feature for a longer period, the Jeep Cherokee offers an A Off button located next to the gear shifter. This button allows drivers to turn off Auto Stop at their convenience, providing a more consistent driving experience without the engine shutting off when the vehicle comes to a stop.
In conclusion, while the Auto Start-Stop feature in Jeep vehicles may have its benefits in terms of reducing emissions and improving fuel efficiency, it is not always desired by every driver. Fortunately, there are methods available to disable the feature temporarily or more permanently, depending on the specific Jeep model.
Whether it involves disconnecting the IBS plug or utilizing the A Off button, drivers have options to maximize their fuel efficiency and comfort while driving their 2019 Jeep Cherokee.